Cutting Tool Covers (Various)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep your cutting tools safe in your toolbox! Various types & sizes for Forstner, router and step drill bits.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 39
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Very simple models to cover cutting tools. Mine roll around in my toolbox and I don't want them banging in to each other and chipping the cutting edges.
Material, layer height, and fill percentage are flexible.
Versions shown are Hatchbox orange ABS at 0.35-mm layer height and 25% fill. The nice part is that if they fit a little tight that can be remedied with the tool itself!
Files for covers included for:
Forstner Drill Bits
Famag ½-in, Freud ¾-in, Freud 1-in, Freud 1 1/8-in, Freud 2-in
Router Bits
Freud ½-in straight-cut , Freud 1/8-in round-over, Freud 5/16-in round-over
Step Drill Bits
Unibit ½-in, Unibit 7/8-in, Milwaukee 4-12-mm
These covers may work with other versions of the same tools, but I know for sure that they work with the tools that I have on hand.
The designs are very simple.
The Forstner bit covers are just thin-walled cylinders with a floor thick enough for a divot for the bit pilot point.
The router bit covers have a space for the bearing retaining screw, or the screw and the bearing.
The step drill bits interface with the top diameter and the bottom diameter. The space in between is a simple cylinder.