1 / 3
3D printed parts for the P-38 Lightning shockflyer (from scale-parkflyer.de) — image 1
1 / 3

3D printed parts for the P-38 Lightning shockflyer (from scale-parkflyer.de)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parts needed to complete the model kit.

Rating
0 / 5
Likes
6
Downloads
38
Makes
0
Views
473
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

The P-38 model from scale-parkflyer.de is a unique little shockflyer model, yet the kit you can purchase on their website lacks a few parts needed: the rudder horns and the motor bulkhead. So I designed these parts to be 3D printed with small effort.

I recommend printing all of these parts using PC filament with 100% infill at a layer height of 0.15 mm.
PA is fine as well if you have a way to reliably glue it; PA-CF is not really recommended due to its rough surface. PETG, PCTG, ABS, or ASA should be ok as well (yet I have not tested these). Do not use PLA or any LW filament like LW-PLA or LW-ASA.

The bulkhead's measurements fit a standard 28 mm shocky motor. For motors with a smaller size, additional holes can easily be drilled.

Tags