Leg for IKEA BESTÅ
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Leg for IKEA BESTÅ storage system, inspired by STUBBARP leg.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 119
- Makes
- 1
- Views
- 868
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this leg for the IKEA BESTÅ system (STUBBARP), because I needed a specific lower height than what IKEA offers.
The height and the edge radius are parametric, so you can easily modify them in a CAD program according to your needs. (If that is too much hassle for you, you can also use your slicer's cut tool.)
Please be aware that the total height of the leg will be 5mm more than you set in the parameter leg_height, because of the fased part. (e.g. leg_height: 85mm + fased part height 5mm = 90mm)
Leg_height is initally set to 75mm so as not to outright “compete” with IKEA's product. To see how you can change parameters in a CAD model, click here.
You might run into problems if you set to leg_height to less than 55mm because of the bore lenghts. Therefore, I recommend you to set leg_height above 55mm, if you don't want to have extra work. 😊