CR10 S5 Frame Stiffener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame stiffener, reuploaded from Thingiverse.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 27
- Makes
- 0
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I printed with 60% infill. Took me several tries, maybe do to Z drift.
Summary
These parts were made to reduce the vibrations caused by the height of the printer, and to stiffen the frame, even a little bit in the x- axis. Easy assembly guaranteed. These were made for the Cr 10 S5!! I don't know if the normal Cr 10 or the Cr10 S4 got the same angle relations (height -> length)
You need:
8x M10 Nuts
20x M3x10 oval head screw (fillister screw, countersunk screw, panhead screw) i don't
know the correct name in english
2x M10 threaded rod
20x M3 Nut for T-Nut
The screws will fit exactly in this T-Nuts by DrNeis. You need 20 of those T-Nuts.
https://www.thingiverse.com/thing:2677626
Just take out those colored stripes, cut it down and shove in the T-Nuts.
Have Fun and let me hear what you think :)
Print Settings
Printer:
CR 10 S5
Rafts:
No
Supports:
Yes
Resolution:
0.1 / 0.2
Infill:
30%
Notes:
I used 30% Infill and 3 shells. Probably that's a little much i guess it would work with lower Settings. Just wanted to be sure its strong. To get the other side of the top part just mirror it in your Slicer.