1 / 4
Extensions for Glock magazines
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
+3 Magazine Extensions for 9 x 19 Glock 17 OEM Magazines
- Rating
- 4.75 / 5
- Likes
- 342
- Downloads
- 3,076
- Makes
- 12
- Views
- 14,701
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
+3 Magazine Extensions for 9 x 19 Glock 17 OEM Magazines.
Additional Hardware Required:
- M3 Threaded Inserts
- DIN 912 M3 x 6mm Hex Socket Head Screw or equivalent
- Soldering iron or long M3 Screw + heat source
- Sharp knife or Dremel
Recommended Print Settings:
- 4+ Perimeters
- 100% Infill
- 0.15mm Layer Height
Instructions:
- Disassemble the magazine
- Remove the two lugs on the bottom of the magazine with a sharp knife or dremel tool.
- Use a soldering iron or a long M3 screw + a heat source to heat and seat the threaded inserts into the provided 4mm blind holes.
- Reassemble the magazine using the original spring and spring retaining plate.
- Lock the extension in place with two M3 x 6mm screws
Local laws apply
If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…