1 / 6
Paraglider riser mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use it to mount my AnyTone PTT button to my Nova Mentor 7 Light. Velcro tape and strips are required for mounting.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 994
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Use it to mount my AnyTone PTT button to my Nova Mentor 7 Light wing.
Velcro tape and strips are also needed, I used 2 cm wide velcro tape and 2.5 mm wide strips.
The parameters in the .scad file can be changed to mount on a different raiser size or with other devices.
Printed with:
- Fillament: add:north PETG Pro Matte
- Print speed: 15 mm/s
- Nozzle size: 0.4 mm
- Layer height: 0.20 mm
- Line width: 0.40 mm
- Top/Bottom line width: 0.28 mm
- Print temperature: 240 °C
- Bed temperature: 72 °C
- Top/Bottom line directions: [0, -45, 45, 0]