Sovol SV05 PEI sheet guide for hot bed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple rear mounted guide to aid refitting any magnetic printing sheet (I use PEI on steel)
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 67
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
It is always helpful to have a guide when replacing a PEI sheet onto the heated bed (especially if the bed is hot).
I have had this SV05 for a very short time but there seemed to be an easy fitting option - the bolts at the rear. I designed this with slots to allow adjustment. I also allowed space for my hotbed cable strain relief that is bolted to the bed. There are two slots to allow extra nuts and bolts at the edges ( a little post processing might be necessary). I reused the existing M$ bolts to fit the guide.
I printed in PETG because of the heated bed contact. I used 0.28 layer height and 15% infill. It fits the SV05 bed at 45 degrees and needs no supports - the only overhangs are at 45 degrees.
It has been in use for a while and I have had no problems with it.