WERA electronics screwdriver holder for Bott Perfo
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.33 – €5.30 net (excluding VAT)
For file: wera-kraftform-bott-perfo-rev3_02mm_petg_mk3s_5.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.82 excluding VAT (range midpoint).
- Weight reported by the author
- 56 g
- Print time reported by the author
- 5.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of KVEL's WERA Screwdriver Holder with improved Bott Perfo Brackets.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 291
- Makes
- 0
- Views
- 1,545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Remix of KVEL's WERA Screwdriver Holder with improved Bott Perfo Brackets.
Print instructions
Additional parts required: -
6 x M3 Brass Heat Set Inserts (for Bott Brackets)
1 x M3x8 Socket Cap Hex Machine Screw
2 x M3x10 Socket Cap Hex Machine Screws
1 x M3x12 Socket Cap Hex Machine Screw
2 x M3x25 Socket Cap Hex Machine Screws
M3 Brass Inserts to be mounted into the Bott Brackets from the opposite side to the Bott Clip. Machine Screws used to fix through the holder into the brackets.