Shelf divider
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.61 – €1.97 net (excluding VAT)
For file: shelf divider - small_2h3m_0.20mm_205C_PLA_ENDER3V2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.79 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple clip-on shelf divider for 5mm shelves
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 73
- Makes
- 0
- Views
- 743
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Share Alike
A simple, lightweight clip-on shelf divider for some 5mm glass shelves. Based on the design of the wire ones you can get from The Container Store, but I didn't want to try the metal on glass shelves.
Created in OnShape; there's a larger version in there for those of you with larger print beds. If your printer isn't very well dialed in you'll probably have to snap the end of the hook off from the main body, but it's easy enough.