Archimedes clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A different take on the fibonacci clock.
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 211
- Makes
- 1
- Views
- 2,183
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this as a smoother variant of the fibonacci clock.
Constructed with an archimedes spiral.
The printed part is a bigger version with 320mm. For accessibility I changed the modell to 240mm overall.
Printed in two colors but you might as well print it without inlay.
The Clockwork is out of a old ikea clock, many should fit this modell as long as they are not much bigger than 60mm. The one I used is 60x60mm (space inside is 62,5mm).
One last tip if you want to print in two colors but dont have a MMU like me.
You need to load the housing and add the inlay like shown in the pictures, so that they line up. Then under Printer settings you chose 2 extruders and under custom G-code you type M600 under G-code for tool change. Optionally change the color of the extruders under extruder 1/2, so the preview shows it. The printer should pause and ask you to change fillament.
Thats it, have fun.