Simple Runout Filament Sensor Base
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.10 net (excluding VAT)
For file: Base Sensor Filamento + Pin de sujección / ce5_sensor-fill-base-p.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Soporte para sensor de rotura de filamento.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 49
- Makes
- 0
- Views
- 646
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Soporte para sensor de rotura de filamento. se fija a la estructura de la impresora a presión... los pines plasticos se colocan por inserción en el sensor, y en la base. puede usar pegamento adicional si lo desea.
ENGLISH:
Support for filament break sensor. it is fixed to the frame of the printer by pressure ... the plastic pins are placed by insertion in the sensor, and in the base. you can use additional glue if you like.
Print instructions
Category: 3D Printer Accessories Summary
Soporte para sensor de rotura de filamento. se fija a la estructura de la impresora a presión... los pines plasticos se colocan por inserción en el sensor, y en la base. puede usar pegamento adicional si lo desea.
ENGLISH:
Support for filament break sensor. it is fixed to the frame of the printer by pressure ... the plastic pins are placed by insertion in the sensor, and in the base. you can use additional glue if you like.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
</div>Rafts:No
Supports:
No
</div>Resolution:0.2
Infill:
20%
</div>Filament:
bimek3d PLA Black
Notes:
Diseñado para este tipo de sensor:
https://www.amazon.com/gp/product/B07SFFXC9C/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&psc=1
el archivo incluye un solo soporte, por tanto, debe multiplicarlo.
La base puede imprimirse en 0.2
La base debe girarse para evitar usar soportes. aun asi, puede activarlos para las pestañas de sujeción.
se sugiere colocar primero la base a la estructura de la impresora, y luego colocar el sensor e insertar los pines. puede ser necesario martillarlos suavemente para que ingresen
ENGLISH:
Designed for this kind of sensors:
https://www.amazon.com/gp/product/B07SFFXC9C/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&psc=1
The cylinders can be printed at 0.12 for better homogeneity.
the file includes only one medium, therefore you must multiply it.
The base can be printed in 0.2
The base must be rotated to avoid using supports. you can still turn them on for the holding tabs.
It is suggested to attach the base to the printer frame first, and then attach the sensor and insert the pins. may need to be tapped gently to enter