Female Buckle Replacement for 15mm Strap
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.32 – €0.39 net (excluding VAT)
For file: Buckle_on_back_0.2mm_PETG_MINI_27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 26.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands as well.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 90
- Makes
- 0
- Views
- 872
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well.
It is printable without supports when printed vertically on its “legs” (the STL should be in the correct orientation by default when imported into your slicer). Alternatively, it can be printed on its back for greater strength, but supports will be required. If you are having issues with layer adhesion, this is not the model for you.
I recommend printing in PETG or ASA for strength, and with a minimum of three perimeters. A small brim maybe required for good bed adhesion.