Batman Logo- Adam West Era - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I took the batman logo from the Adam west era and put it into hueforge and made a print out of it.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 296
- Makes
- 2
- Views
- 1,631
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the adam west batman logo and put it into hueforge and made a print from it
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Sapphire Blue
At layer #12 (1.04mm) swap to White
At layer #21 (1.76mm) swap to Savannah Yellow for the rest.