1 / 1
Classic Superman Symbol - Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I took the classic superman symbol and placed it into hueforge and made a print out of it.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 433
- Makes
- 1
- Views
- 1,962
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the classic superman symbol and placed it into hueforge and made a print out of it.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
Swap Instructions:
Start with Lava Red
At layer #12 (1.04mm) swap to Savannah Yellow for the rest.