Magnetic Nozzle Reminder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.89 – €1.09 net (excluding VAT)
For file: nozzle_indicator_bicolor_0.4n_0.15mm_PETG_MK4_1h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.99 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.05 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A frame with magnetic indicator plates to remind you of the mounted nozzle. Will hold on any steel housing directly too.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 49
- Makes
- 0
- Views
- 484
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
If you want to have a bicolor print, set the color change at 3.2mm.
Choosing PETG is my top recommendation if you plan to use the lugs for the 2mm cable ties. However, PLA is also a viable option. For the best results, consider using a layer height of 0.15-0.20mm.
Regarding magnets, I've had success with the affordable 10mm magnets from Am*zon, as they provide a tight fit. Alternatively, you can opt for gluing the magnets in place. Avoid molding them into the design, as that may reduce their magnetism.
To ensure a perfect fit for the holder, use a M5 washer and securely glue it. Keep in mind that stainless or plastic washers are not suitable for this purpose.