HP Elitedesk 800 G2 Mini - SSD Mounting Bushes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SSD / HDD cradle mounting bushes
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 197
- Makes
- 0
- Views
- 1,010
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HP Elitedesk 800 G2 Mini - SSD Bushes
I recently purchase the above PC only to find that the bushes for SSD or HDD were missing.
I think the original HP bushings were made of a hard rubber compound.
I designed some new bushings in PLA and they certainly hold the SSD in the cradle very well.
They are screwed to the SSD with 4x M3x10 or 12mm countersunk screws.
Note: the bushing to the front left does not have an outer shoulder so it can fit within the spring clip in the caddy/cradle. The clip has "HDD" stamped on the lever.
Printed at 0.20mm with no supports required.
STEP files are included in case you need to make amendments.
Hope this helps someone.