Lack Enclosure pass through holed bolt M10
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.67 – €0.82 net (excluding VAT)
For file: m10boltlack-bored4-2mm2-4mm_02mm_pla_mk3s_57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.75 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 57.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement for the default Lack enclosure top inserts for feeding filament into a Lack enclosure. No glue.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 127
- Makes
- 2
- Views
- 652
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Replacement for the default Lack enclosure top inserts for feeding filament into a Lack enclosure. No glue. Top should take a 4mm PTFE tube; bottom feeds 1.75 mm filament.
Print instructions
Print bolt shaft upright with a 0.4mm nozzle 0.15mm layer height.
The threads will survive 0.20 mm layer heigh if you want to save time.
The GCODE is for PLA but I recommend PET-G; could be less friction for the filament as it passes through.