Universal Travel Coffee Gimbal - Can Insert (with and without driphole)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted a simple can insert so knocked this up using the original small cup insert.
- Rating
- 5 / 5
- Likes
- 61
- Downloads
- 315
- Makes
- 6
- Views
- 1,764
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a simple can insert so knocked this up using the original small cup insert. Two versions with and without a drip hole.
You could use it for bottles and cans and also the smaller coffee cups. Internal diameter is 73.5mm so there is room for a cosy on the can (most cans are around 67mm diameter) Height is about 88mm so there is room for the can to protrude and easily be taken out of the holder.
I have also added a collar insert in case you don't want the can moving around and should provide a “snug fit” I haven't yet printed the collar to test but there is no reason it shouldn't work. Any requests please let me know and please post those makes :)
ETA - This was designed to printed on a 0.5mm nozzle however I have sliced it in a 0.4mm nozzle profile and it is just fine, on my 0.5 its 4 walls thick on the 0.4 it's 5 walls thick (assuming a 0.5 or 0.4mm line width)