Stand Up Paddleboard Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the original model to fit on BambuLabs printers and changed from bolts to press fit.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 32
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Scaled it down to fit smaller print bed (248mm height)
Changed from the M3 bolt hole design to press fit pins in the bottom of the base to attach the top of the base
Adjusted the wiring hole to fit standard USB LED strip light cables (original was already designed for this but after scaling down it had to be changed)
Cut out some of the mounting area for the LED strip to give more room and an easier time sticking it down (again because of the size difference)
Board - vase mode, 0.12 layer height, Inland White PLA
Base - 0.16 layer height, 20% infill, BamboLabs Blue Matte PLA
Fin - 0.16, enough top/bottom layers to be solid