1 / 4
Ricoh GRIII / GRIIIx Compact Arca Tripod Plate [UPDATED] — image 1
1 / 4

Ricoh GRIII / GRIIIx Compact Arca Tripod Plate [UPDATED]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

NEW VERSION - A significantly improved version of my compact arca type tripod plate for the Ricoh GR III and IIIx

Rating
0 / 5
Likes
22
Downloads
162
Makes
0
Views
1,461
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a significantly improved version of my compact arca-type tripod plate designed to fit the Ricoh GRIII / GRIIIx. See the end for details about what's new/different. 

Pictured here in Protopasta dusty smoke HTPLA and Prusament PETG galaxy black.

Screws

I've tested it with these screws: https://www.mcmaster.com/92220A181/

Just get a 1/4 20 screw with about 1/4" long shaft and 1/8" long head, with a head no wider than 0.375"

⚠ Disclaimer! Use at your own risk!

I have been using 3d printed tripod plate + strap connector combos for years with no problems, but ultimately the safety of your gear is up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.

What's new & improved

This version was redesigned from scratch starting from a flatbed scan of the bottom of the camera. Improvements include:

  • Shape braces against the edges of the camera better, so less wiggle
  • Covers entire bottom of camera (with a battery door hole), so it should sit flat on tables more easily
  • No longer blocks the official hood/filter adapters from mounting - there's a cutout for the big bump. Note: This change has only been tested on the GRIIIX with the GA-2 filter adapter… If you have a GRIII and can give it a try, please let me know if it works!
  • More curve on the front part of the arca plate area, to make it more comfortable to hold. 
  • Bottom left strap mounting point added - if you want to hang the camera vertically with a two point strap from either the right or the left, now you can. 

I'll come back and do the version for the GR I and II later!

Tags