Fillament Guide for SOVOL SV06
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small loop to replace the Filament holder on the SOVOL SV06 to guide the filament path
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 64
- Makes
- 1
- Views
- 345
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A small loop to replace the Filament holder on the SOVOL SV06 to guide the filament path when using an external fillament holder
this is much smaller than the original filament spool holder and can be useful if you need to fit the printer in an enclosure or under a shelf
The gcode shared in this upload is what I used to print this on my SOVOL SV06 in PLA+ the temperature was set to 210 so it should be compatible with ordinary PLA as well
The original Onshape design document can be found at https://cad.onshape.com/documents/c06684c9d049aff93973856a/w/9da675b670fa748aee3ded59/e/1dd874092dfeeba7a5ccc3d8