The Triple Cup Holder & Headset Hook
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€22.91 – €28.00 net (excluding VAT)
For file: 3_Cup_Holder_All_Parts_0.4n_0.2mm_PLA_MK3S_1d0h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €25.46 excluding VAT (range midpoint).
- Weight reported by the author
- 334 g
- Print time reported by the author
- 24.72 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cup holder for up to 3 cups, or 1 cup and 2 headset hooks.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 55
- Makes
- 0
- Views
- 698
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
A modular take on Martin_au's Laptop Saver Drink Holder. When workspace is at a premium and you need coffee, tea & Mountain Dew all at the same time.
I came up with this when a coworker had their drinks on their desk, blocking their monitor. Martin_au's drink holder would be perfect, but my coworker informed me that usually like to have 2 or 3 drinks at a. time. That's when I came up with this.
The design is modular, so you can either have just one item, be it a drink holder or headset hook, or multiple items. Mix and match for whatever you need.
Just note I have not tested the weight capacity.
A gcode is included if you wish to print all the pieces at once. [the clamp, 1 big middle cup, 1 normal side cup, and 1 headset hook]
For all the individual pieces, I recommend downloading them from Martin_au Here.
You may have noticed a strange STL file titled "Bracket_Band_Only". This is to be used specifically for the Add negative volume feature in PrusaSlicer. When you add this negative volume to the bracket.stl, you get these groves on the sides of the top of the bracket. This is to guide a rubber band so it evenly spaced and it will act as an anti-slip without the need to increase the tension on the clamping force.
