60mm suction hose to DN60 tube connector adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fit 60mm suction hoses to my latest dust extraction cyclone project
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 55
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my latest dust extraction cyclone project stage I chose to use DN60 sockets because I am using 60mm suctiion hoses in my workshop and the DN75 I used in stage1 of my project was too clumsy to design with. So here is my adapter for DN60 tubing to my 60mm suction hose.
You get three designs here. One (long) is suited best for regular DN60 tubing from your local hardware shop. The short versions are specifically designed to fit my Cyclone stage 2 60mm sockets.
Print instructions
Print Settings
Printer Brand: Anycubic
Printer: All-metal Mega
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15%
Filament: Patona PLA white
Notes
Use a brim to improve bed adhesion!
I always enable adaptive layer height in Cura when printing this type of parts so that more sensitive areas of the object are printed with smaller layers and easy parts are printed with thicker layers.