PTFE tube mounts for LACK enclosure V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to fix the PTFE tubes in front of the buffer on the LACK enclosure V2 directly in front of the spool holders,…
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 243
- Makes
- 6
- Views
- 2,794
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is to fix the PTFE tubes in front of the buffer on the LACK enclosure V2 directly in front of the spool holders, so the filament does not get pulled off the spool.
There are 6 and 10 mm Versions depending on the type of fittings you want to use.
For spool 1 (I don't have a 5, because I have a Drybox there instead) I used an ID 2,5mm PTFE to reduce friction. 2,3 and 4 work nicely with the original ID 2 mm tubes.
You can probably just use the 234-version 5 times instead of using the one (15-version) with the additional tube-guide for spool 1 and 5.
Print instructions
I printed this with PRUSAMENT PETG 0,2mm quality setting on MK3s MMU2 single mode. This is what's in the 2 .3mf files.