Soft Jaw for Doyle 4 1/2" vise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a soft jaw for the Harbor Freight Doyle 4 1/2" vise.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 48
- Makes
- 0
- Views
- 282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a soft jaw for the Harbor Freight Doyle 4 1/2" vise. With the print setting used below it is a fairly dense rubber, lowering the infill to 50%-60% would probably make for a softer jaw that would hold delicate parts more easily, but I was mostly trying to avoid marring a surface finish.
The lips on this model grip the vise very well and it is not going to come off on accident.
I printed in Overture Black TPU on Bambu P1S fully enclosed with “Generic TPU” as the filament settings.
7 wall loops
5 Top and Bottom Shell Layers
90% Cubic infill
Vise:
https://www.harborfreight.com/4-12-in-swivel-vise-with-anvil-and-pipe-jaws-57737.html