1 / 3
Original Prusa Enclosure (OPE) - Ferrite Core Mount for Basic Board + PSU Add-on
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach the ferrite core which is on the cable for the basic board to the enclosure.
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 175
- Makes
- 8
- Views
- 1,002
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The ferrite core hangs around a bit, because the cable to the basic board is just too short to accommodate the core in the enclosure. Maybe the cables for the basic board differ, mine is a bit too short at this point.
With the model you can hide the core a bit and mount it to the enclosure.
The core on my cable has a diameter of 20 mm and is 40 mm long.
You need the following parts:
- M3 x 6 mm Allen bolt
- M3 hexagon nut
No support needed.
The model was created with FreeCAD.