NutriMill Grain Mill Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lifts the grain mill 20mm off the countertop for more clearance.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 1
- Views
- 239
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
My wife is an avid baker and we've switched primarily over to whole grains at home. A while back she got a NutriMill Harvest grain mill, and while it is a phenomenal mill, it was a little on the short side for most of her bowls or small ones going right on a scale. So I drew up a simple riser to lift it. I made sure to include a relief for the cable and vents to allow air to the motor.
Printed on a PrusaMK3S+ in Hatchbox PETG (peacock blue for the wife) at 0.20mm layers
It is a large print a pretty much maxes out the area of the build plate on the MK3