Motoblitz short dart hybrid pusher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Hybrid clip-on pusher for the Nerf Motoblitz
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 83
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
A hybrid clip-on pusher for the Nerf Motoblitz capable of pushing short darts and still fire long dats. Just print the clip upright and the pusher on its side and add a brim if needed.
To install the pusher first slide the pusher part into the clip and then clip it all on the stock pusher
it was tested printed in PETG, but maybe will also work in PLA/PLA+
A word of advice for anyone that wants to convert their Motoblitz to fire short darts:
Before designing this pusher i tried roboscout64 pusher but i observed that it didn't fit:
roboscout64 pusher:
My pusher:
As you can see my pusher has a thicker lower part of the stock pusher, maybe to make it less flexible, and even then it's very wobbly. This shouldn't impede the use of my hybrid pusher on the other stock pusher, but as i said before, you can't use roboscout64 pusher on the thicker (newer?) stock pusher