1 / 1
Dynamod Game System - Blocked Door Insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert for the open single door, blocking access and removable during gameplay when the blockage is knocked out.
- Rating
- 0 / 5
- Likes
- 6
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
More information on the website: https://dynamod.games
Printing Instructions
FDM printing
Great quality settings
| Layer Height | 0.1mm |
| Perimeters/Walls | 2 |
| Infill | 20% |
| Infill Pattern | Rectilinear |
| Perimeter/Walls Speed | 50% of normal |
Print inner walls first:
| In PrusaSlicer | External Perimeters First - Off |
| In Simplify3D | Outline Direction - Inside-Out |
| In IdeaMaker | Shell and Infill Order - Inner Shell > Outer Shell > Infill |
| In Cura 4 | Walls - Outer Before Inner Walls - Off |
| In Cura 5 | Walls - Wall Ordering - Inside To Outside |
Combine Infill Layers:
| In PrusaSlicer | Combine Infill Every - 2 layers |
| In Simplify3D | Combine Infill Every - 2 layers |
| In IdeaMaker | Combine Infill Layers - 2 |
| In Cura 4 & 5 | Infill - Infill Layer Thickness - 0.2mm |
Normal quality settings
| Layer Height | 0.2mm |
| Perimeters/Walls | 2 |
| Infill | 20% |
| Infill Pattern | Rectilinear |
| Perimeter/Walls Speed | 100% of normal |
Print inner walls first:
| In PrusaSlicer | External Perimeters First - Off |
| In Simplify3D | Outline Direction - Inside-Out |
| In IdeaMaker | Shell and Infill Order - Inner Shell > Outer Shell > Infill |
| In Cura 4 | Walls - Outer Before Inner Walls - Off |
| In Cura 5 | Walls - Wall Ordering - Inside To Outside |
Resin printing
Ensure you're not overexposing the models.
- Print straight without angling, just as they are imported. This allows for printing many at once.
- No hollowing.