Japanese Stylize (Filament Painting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 92
- Makes
- 2
- Views
- 968
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
7 Color HueForge model. 'Japanese Stylize' filament painting made using Sunlu and Esun Pla+ filaments.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Sunlu PLA+ Grey Transmission Distance: 2
PLA Sunlu PLA+ Red Transmission Distance: 6
PLA Esun PLA+ Pink Transmission Distance: 8
PLA Sunlu PLA+ Skin Transmission Distance: 6
PLA Esun PLA+ Bone White Transmission Distance: 4
PLA Sunlu PLA+ White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Grey
At layer #6 (0.56mm) swap to Red
At layer #7 (0.64mm) swap to Pink
At layer #9 (0.8mm) swap to Skin
At layer #10 (0.88mm) swap to Bone White
At layer #15 (1.28mm) swap to White for the rest.
This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results.
Use the exact numbers in your slicer to match up properly.
Two different size models are supplied and designed to print with 0.4 nozzle
**If re-scaling model make sure not to alter the Z height of the model**