1 / 4
Creality LD002H and LD002R Build Plate Drip Tray — image 1
1 / 4

Creality LD002H and LD002R Build Plate Drip Tray

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple drip tray for the Creality LD002H and LDH002R build plate to improve my post-processing workflow. After…

Rating
0 / 5
Likes
9
Downloads
55
Makes
0
Views
325
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

A simple drip tray for the Creality LD002H and LDH002R build plate to improve my post-processing workflow.

After removing the build plate from the Anycubic Wash'n'Cure 2, I never have anywhere to sit it where it won't make a mess. This is designed so that the build plate can sit upright and fairly snug on the tray while removing the print. After that, the build plate can be sat tilted to drain off any residual cleaning solution, and air dry before going back in the printer.

There are three different versions

A 'standard' sized drip tray as shown in the photos. This one is 5mm larger than the build plate in all dimensions, and should be fine in most cases.

A 'large' size that is 10mm larger than the build plate to potentially give a bit more physical stability and safety margin to catch all the drips.

A 'large' size with added slots to hold two Creality magnetic flexiplates.

The v2 are exactly the same as the originals, except I put a bit more effort into bevelling the edges.

 

Print Settings

Printer Brand: Creality

Printer: Ender 3 Pro

Rafts: No

Supports: No

Resolution: 0.2

Infill: 40% Grid

Filament: Neat Premium PLA Blue

 

Very easy print. A brim helps prevent warping at the corners. PLA works fine, but PETG is probably a better long term solution thanks to its better chemical resistance. I use 3 x 0.4 mm walls, 5 x 0.2 mm top/bottom layers and a reasonably high infill % to make it rigid and weighty.

Tags