Ikea Milsbo Ziptie Attachment Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original Ikea shelf mount design with a throughhole for zipties
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 101
- Makes
- 0
- Views
- 841
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
Corner and center ziptie mounts for the Ikea Milsbo cabinet. I tried to design as close to the original shelf bracket design to ensure that the new parts could still work to support the glass shelves and provided the same offset for a wire grid installation.
There are 2 holes in opposite directions which makes printing this difficult at times. I would suggest standing the parts on their top and printing with tree/organic supports
PETG-CF seemed to work well for me with the default .2mm STRENGTH Bambu X1C profile.
You can reuse the existing mounting hardware (m4x10 phillips head screws) or can purchase more off Amazon. It may be necessary to use a m4x12 screw if the screw head is beveled