Minecraft Pig
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.01 – €2.45 net (excluding VAT)
For file: Leg2_0.15mm_PLA_MK3S_2h31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.23 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2.51 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Another minecraftfigure made with Onshape.
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 468
- Makes
- 4
- Views
- 1,630
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Share Alike
I made it with original setting (15% infill) and 0.15mm layer height (I think it perfect with 0.20mm LH too) as you can see in the attached files.
It's easy to assemble, as the GIFs show. The connectors work perfectly with the size of 100%, I haven't tried in another size yet.
Entire pig:
You can print the it with supports or you can cut it into separate objects as you want.
Body:
Place it to the bottom and print whit supports (use normal supports instead of organic).
It isn't very easy to remove the support you should use a scalpel and a mini screwdriver.
Head:
Place it to the bottom and print whit supports (here you can use organic too).
You have to print one body, one head, two leg and two leg2.
If you have any question don't hesitate to ask in the comments.
If you like it, you will like it too: https://www.printables.com/model/450640-minecraft-villager-head