Paracord Jig with storage box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Paracord Jig with integrated storage box for small parts. The jig can be removed for working.
- Rating
- 5 / 5
- Likes
- 251
- Downloads
- 862
- Makes
- 6
- Views
- 4,576
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
The Jig is adjustable in length, the scale does not indicate the absolute length of the finished bracelets, but is only for reproducibility.
The box and the top part with the sled are printed from PLA. Nozzle 0.4mm; 0.3mm layer height for the box, 0.2mm for the small parts. The bars for the Monkey Fist should be printed vertically so that the support surfaces are flat. Maybe the holes for the screws in the rods have to be re-drilled a little bit (diameter 2,8mm).
Fixing Paracord attachments
Need 4 pcs. M3x12mm Allen screws with M3 rectangular nuts for the paracord attachment to
the JIG
Fixing the knob
Need 1 pcs. M5x25mm Allen screw , 2 pcs. M5 nut, 1 pc. Washer 5,5mm x 16 for fixing the knob to the slide.
The balls for the monkey fist can be resized in the slicer and are glued together from the hemispheres.