Picoboot + Region switch mount for Panasonic Q
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy way to install a Picoboot and two switches
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 1
- Views
- 607
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
This model allows you to securely mount a Picoboot as well as two switches into your Panasonic Q.
You can use a bit of tape (as seen in the last photo) to level the pico, so that it rests flat on the metal shield.
Switches are press fit. Both switches and the Pico are easily accessible when removing the side panel.
It the pictures, the left switch controls the region, and the right one cuts the 3.3v line on the Picoboot, allowing for secure updates (https://github.com/webhdx/PicoBoot/wiki/Updating-PicoBoot)
Please use 6mm M2 screws to secure the Pico, as longer screws would conflict with the switches.