WMATA Traintrackr frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame for the WMATA Traintrackr.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
A simple frame designed to fit the WMATA PCB board from Traintrackr.
Left side USB access port is sized for the cable provided with the board. May need adjustment for other cables. Due to the size of my printer (PrusaMK3s), the top and bottom are split into two pieces. Use supports just for the connector tabs on the top and bottom, otherwise not required.
All pieces should press together and fit snugly. My own print had some slight gaps I can live with.
UPDATE: 9/17/2023
Added an alternate left hand side with an angled pocket. Place a 90° USB adapter here and a USB-C plug can fit in the frame's pocket. Because of space you'll need to put the adapter in before sliding the board in all the way. The cord can then be hidden behind the frame. Useful if you want a neater look and don't want to solder to the 5v pads on the back of the board.
I tested fit with the TrainTracker provided cord and this adapter, although it there's enough play other adapters and cables should work.