5" touchscreen desk case with RPi4 mount in it, for Octoprint
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5" touchscreen desktop case with RPi4 mount inside. This allows the display to be used universally.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 41
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
5" touchscreen desktop case with RPi4 mount inside. This allows the display to be used universally. This can be used for Octoprint.
I used four M3*10 each for mounting the RPi4 and the lid.
Four matching nuts are also needed for both.
The nuts for the lid can be inserted either subsequently or by print in place.
Parts list:
Changelog:
v2: The tolerances for the grooves of the m3 nuts have been increased so that the nuts can be inserted more easily.
v3: The tolerance for the M3 screws was increased so that the screws fit better through the holes. Also, the lid was made a little thicker.