1 / 6
Garbage Bag Dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A garbage bag dispenser to screw on
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 129
- Makes
- 0
- Views
- 1,200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- BSD License
Description
A dispenser for 2x 140 mm and 1x 97 mm garbage bags.
Lengths and sizes can vary, so I've included a drawing so you can check if it fits your bags.
I used wood screws to attach to the wall. So far it has held up for 4 years with no problems.
Requires the following hardware:
4x Wood screw 4x15 mm
Print settings:
Material
PLA (PETG preferred)
Layer height
<0,2 mm
Infill
>15%
Support
None
Alignment
At 45 degrees it will fit on a 220 x 220mm print bed