Knosti sealing shells for Disco-antistat II.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New enlarged sealing shells for the knosti Disco-antistat II.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 122
- Makes
- 0
- Views
- 556
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I like my Knosti Disco-antistat vinyl washer, it's not too expensive, and it's doing a good job.
But unfortunately, it lets in a bit of water along the o-ring gaskets, causing the labels to dissolve a tiny bit along the edges.
So I maked these new sealing shells, they are slightly wider than the original ones (106 mm → 111 mm), and so far, after washing 20-25 LPs, I have not had a single wet label.
The new shells use the original spindle, but new o-rings are needed (size 108x3.5 mm).
https://www.aliexpress.com/item/33008473567.html?spm=a2g0o.order_list.order_list_main.5.4e8218029icrnA
I printed the shells in PLA, and added a cylinder support enforcer to enforce support only inside the shell, but not in the o-rings groove.
UPDATE:
A shell B version 2 is added with better thread for the spindle.
I also added shell A + B 3mf files with support enforcers.