Classic Sling Shot or Paper Wad Shooter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We used to look for a forked stick/branch from a tree for building a sling shot. Now you can just print one.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 306
- Makes
- 2
- Views
- 1,367
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
Before starting this model, you need to decide which weapon you wish to construct. If this is for a younger person, think about the nearby environment. I.e. are there a number of buildings/windows within range of an accidental shot?
A paper wad shooter only needs a single rubber band (or possibly more - connected using slip knots) as shown in the photo. The end of the rubber band is attached to the “forked stick” by stretching it and sliding it into the slot followed by looping the loose end around to the other side. Pulling on the stretched part snugs up the connection.
Ideal non-deadly paper wad ammunition is available in the form of Post-it notes. A page from a 3 inch (76mm) pad works well when cut so that half of the glue strip is left on each piece. Then folding it so that the glue strip is the final fold and holds the paper wad nicely together (See photo).
The sling shot needs a leather pouch to hold the projectile. A sample pattern is included that can be printed and used as a stencil for tracing. Note: the diamond cut in the center helps the leather conform to the projectile shape to avoid it slipping out when launched. Rubber bands are attached to the leather using slip knots, then the other end of the rubber bands are attached to the “forked stick” the same as the paper wad shooter.
Printing Hints
Print the slingshot with support and a wide brim for adhesion. I used two shells and 25% hexagonal fill.
Note: the template pattern for the leather pouch won’t need support.