1 / 13
Ultimaker block for 8x11x30 and 6mm cross shafts — image 1
1 / 13

Ultimaker block for 8x11x30 and 6mm cross shafts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Блоки Ultimaker для втулок 8x11x30 и 6мм валов крестовины. Для разомкнутого ремня, блоки с возможностью регулировки…

Rating
0 / 5
Likes
5
Downloads
27
Makes
0
Views
206
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

Блоки Ultimaker для втулок 8x11x30 и 6мм валов крестовины.

Для разомкнутого ремня, блоки с возможностью регулировки натяжения ремня.

Идею для блоков позаимствовал у проекта Ulti.

Обновление 29.05.2020

Блоки - Block_Y_2 и Block_Y_4_EndStop - были отзеркалены, так что бы натяжитель ремня теперь был справа, когда он был слева, то мог немного мешать парковке домой.

Обновление 18.07.2020

Обновлены модели блоков, теперь не нужны поддержки при печати.

Исходники: https://www.tinkercad.com/things/jAfyLx2KUy7

==========================================

Ultimaker block for sleeve 8x11x30 and 6mm cross shafts

For open belt with tension adjustment

Inspiration for the blocks I took from the project UlTi

Update 29.05.2020

The blocks - Block_Y_2 and Block_Y_4_EndStop - mirrored, so that the belt tensioner was now on the right, when it was on the left, it could interfere with parking home.

Update 17.07.2020

Model block update - no need supports

Source code: https://www.tinkercad.com/things/jAfyLx2KUy7

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

30

Filament: 3dplast CoPET

Category: 3D Printer Accessories

Tags