Lathe Tailstock Die Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.24 – €7.62 net (excluding VAT)
For file: die_holder_02mm_pla_mk3s_7h58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.93 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 7.97 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Thread die holder for 20 mm dies. Fits on lathe tailstock spindle with 30 mm outer diameter.
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 179
- Makes
- 0
- Views
- 2,032
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Thread die holder for 20 mm dies. Fits on lathe tailstock spindle with 30 mm outer diameter.
This is a remix of a design by Marius Hornberger. https://www.thingiverse.com/thing:4625352
I changed it to fit 20 mm x 7 mm dies. Additionally I added M2-screws to increase the part strength. The main load goes on threads along the layer direction, which could cause shearing the holder. The M2 screws prevent the print from delamination.
Tools:
M4 thread cutter
(M4 thread cutter - optional)
Hardware:
4x M4x16 cylinder head screw
(4m M2x16 countersunk screw -optional, when used: tighten them before cutting the M4 threads)
Print instructions
PLA; 0.2 mm layer height; 0.4 mm nozzle; add a modifier to the top section (see photo) and increase to 6 perimeters, 7 top layers and 25% infill