1 / 2
Board: Shapes (hollow)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Study board with shapes for kids.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 57
- Makes
- 1
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Study board with shapes for kids.
For easier studying try to print it with more colors.
Printing tips
- Infill: use as little as possible for the board (I used 10%) to keep the board light.
- Bending: use glue stick or spray to keep your print hold on the plate.
- Size: should print fine even at 50% due to added spacing.
- Shapes: if you want to have both sides smooth you can try ironing.
- Versions: there are two version of the board included
- hollow full = you will for sure need supports to print this. I printed it upside down and had “fun” removing the supports but it looked a lot better.
- hollow partial = you can print it without supports. I strongly recommend using glue stick or glue spray to keep it on the plate while printing.