1 / 1
Hadley Altitude Bearing Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer for if you printed one of the narrower mount interfaces but need the wider one for wooden mounts.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 0
- Views
- 733
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
Wooden hadley mounts need the Mount_Interface_wider_WOOD-ROCKER-ONLY.stl
If you printed one of the other ones like I did (I wanted the one with the planets on it) then the altitude bearings will be too close together for wooden mounts. Add this in between the mount interface and the Z bearings.
Match the rounds on the shim to the ones on the mount interface.
You will need longer screws.