ECOVACS DEEBOT (X1 e OMNI) mopping pads holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.73 – €0.89 net (excluding VAT)
For file: Ecovacs Cleaning Pads Holder_0.4n_0.3mm_PLA_MK3S_46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 46.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
ECOVACS DEEBOT (X1 e OMNI) mopping pads holder
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 51
- Makes
- 2
- Views
- 664
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
ECOVACS DEEBOT (X1 e OMNI) cleaning pads holder to store the mopping pads when you do not want to use them.
You can simply slide the pads onto the hexagon posts and if you want to secure them even more in place you can add two 6x3mm magnets onto the top of the posts to hold the pads really strong in place.
The holder also has two 6mm holes to screw it to a wall or add some double sided tape on the back of the holder, which should be more than enough to hold these light pads…
Printing instructions:
- 0.3 draft profile used
- Textured sheet used
- No supports
- No brim required
Happy printing =)