1 / 6
Matchbox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A container for matches with a slot for the striking surfaces to light the match. The hinge is held by a 1mm brass wire
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 35
- Makes
- 1
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A container for matches with a slot for the striking surfaces to light the match. The hinge is held by a 1mm brass wire but you could probably drill the hole to 1.75mm so you can use filament as the pin.
The only part that I used support on was the bottom of the base part. The rest should be fine.
I dont have the mmu2/3 so i paused the print where I wanted to have the orange part.