1 / 4
Split Blast Gate (4in to two 2in)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One 4 inch (100mm) input and two 2 inch (50mm) outputs with blast gates on each output ports.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 170
- Makes
- 0
- Views
- 976
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I started with the original single blast gate design from Jok and resized and made some modifications. Then for added the single 4 inch intake port, (or output port depending on how you want to look at it)
The 4 inch side will fit a standard 4" flex hose or a 4" pvc pipe. When inserting directly into the pipe wrapping the print 1-2 times with tape give a snug fit and creates a good seal.
Also 12 M3 x 8mm screws and nuts are needed to assemble the two gates.