MI100 dual 40mm fan shroud
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.45 – €3.00 net (excluding VAT)
For file: shroudV4_0.4n_0.3mm_PETG_MK3S_2h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.72 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 2.3 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Custom made cooling shroud made to use 40mm high static pressure fans.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 70
- Makes
- 0
- Views
- 505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two versions of the cooling shroud for my MI100 GPU in my server.
Supports recommended but not needed for the power connector tunnel.
Recommended printing with 40mm holes facing the buildplate.