Hueforge Samurai
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
What might this samurai be thinking? (In Hueforge for sure)
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 113
- Makes
- 3
- Views
- 864
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Charcoal Black
At layer #6 (0.56mm) swap to Blue
At layer #8 (0.72mm) swap to Red
At layer #9 (0.8mm) swap to Orange
At layer #14 (1.2mm) swap to Savannah Yellow
At layer #15 (1.28mm) swap to White for the rest.