Gridfinity Bin Label Cutting Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a jig to cut Brother 17mm X 54.3mm (0.66in X 2.1in) return address labels down for use as Gridfinity bin labels
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 115
- Makes
- 1
- Views
- 2,681
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This jig is used to perfectly cut down Brother 17mm X 54.3mm (0.66in X 2.1in) return address labels for use with Gridfinity bins.
Just stick the label into the jig with the label information in the bottom left corner, line up a razor blade at the end of the raised edges, and press down into the recess. It should cut the excess off cleanly.
Once the label is cut, line up the bottom left corner of the label with the bottom left corner of the label plate on the bin.
Then you just fold the excess on the top over the label plate edge and you end up with a nice, clean label.
This should take about 5 minutes to print with 100% infill at .2 layer height.
Be safe when working with razor blades. I'm not responsible for missing digits, blood, or other injuries.